Payment & Shipping Terms:
|Name:||6 Axis Deep Hole Drilling Machine With Milling||Drilling Aperture:||3-35mm|
|Drilling Depth:||1500mm||Processing Range Of Sliding Table:||1700mm|
|Processing Range Of Column:||800mm||Spindle Motor:||11/18.5KW|
multi axis cnc drilling machine,
cnc gun drilling machine
6 axis deep hole drilling machine, with milliing, tapping function, drilling capacity 1500mm, 4 axis moving in same time
CNC system: stable performance, convenient operation programming, perfect and punctual after-sales service.
FANUC servo motor for six coordinate axis and main axis: good characteristic and perfect low speed performance.
With high-precision ball screw bar and rolling linear guide, the operating components make positioning accurately.
Remote control device is adopted in cooling system. Depends on the hole size, materials, chips and required precision, adjusting the flow rate and pressure can optimize the cooling result.
Precision detection: The dynamic inspection is done by British Renishaw laser interferometer. It makes compensation dynamically according to the test result, which ensures the positioning of the whole machine and re-positioning accurately.
CNC deep-hole drilling machine is mainly used for extremely difficult processes of deep-hole in mold industry. It’s spoken highly of its high-efficiency, low-cost, humanized technological process.
|Processing range (from leftt to right) of the working table||3000mm|
|Processing range of sliding table||1700mm|
|Processing range of column||800mm|
|The rotary angle of ram||The spindle turns upward 15 degrees and down to 25 degrees|
|Maximum speed of spindle||4500rpm|
|X axis servo motor||38N.m|
|Y axis servo motor||38N.m|
|Z axis servo motor||38N.m|
|W axis servo motor||30N.m|
|A axis servo motor||38N.m|
|B axis servo motor||38N.m|
|Max.loading capacity of index table||20ton|
|Measurement of CNC index table||2200*2400mm|
|Pressure range of cooling liquid(gun drill)||2-15Mpa|
|Flux of cooling liquid||6-85l/min|
|Floor area of machine tool||10050*7200mm|
|Maximum height if machine tool||5800mm|
Contact Person: sale